Jet 719-A Floor Standing Morticer
A floor standing morticer with a 25mm capacity. The unique screw and fast action nut allows the material clamp to be set across its length in seconds. With fully adjustable slideways the morticer has travel in both directions with lock on the fore and aft setting. The main operating handle has a clever ratchet setting which allows it to be quickly set in the correct position for optimum leverage. The depth stop is simple and very effective to use. Along the back of the main table is a mortice length setting device which allows the mortice length to be pre-set for reduced marking out. The cabinet base is fabricated from heavy gauge sheet steel and incorporates a shelf in the base for storage of chisels, bits and service tools. Bushes are provided for 3/4", 13/16" and 1.13/16" shank chisels. Supplied with cabinet base, chisel bushings and service tools.
Key Features
- 25mm capacity
- Accurate and quick-to-change material clamp
- Fully adjustable slideways
- Ratchet setting on main operating handle
- Motor and switch gear are virtually silent in operation
- Simple and effective depth stop
- Head rotates 180° for door lock morticing
- Cabinet base fabricated from heavy gauge sheet steel
- Supplied with bushes for 3/4", 13/16" and 1.13/16" shank chisels and cabinet base
| Specification for Jet 719-A Floor Standing Morticer: | |
|---|---|
| Capacity140 x 190mm |
|
| Centre of Chisel to Back Fence 100mm | |
| Chisel Stroke 140mm | |
| Input Power S6 40% 1295W | |
| Max Chisel Size Hardwood 19mm | |
| Max Chisel Size Softwood25mm | |
| Max Height of Timber with 12.7mm Chisel and Bit 190mm | |
| Model 719-A | |
| Nett Weight 110kg | |
| Output Power S6 40% 1005W | |
| Overall L x W x H 700 x 580 x 950mm (1550 inc stand) | |
| Power Input 1300 W |
|
