Startrite DMS53 Thickness Planer
The DMS53 has a capacity of 530mm x 300mm with a working table of 530 x 950mm with table rollers. As you would expect from a machine of this size it has two feed speeds and separate feed motor together with a separate motor for power lifting of the table. It has digital read out of working table position and a hand wheel for fine adjustment. The cutter block is 125mm diameter with four knives and driven by a 7.5hp main motor. With two feed speeds of 8 and 16 m/min, the DMS53 gives an excellent finish on all stock. The machine is heavily built at 680 kilo but provides an extremely economic solution for wide planing.
Working Width (mm) 530mm
Working Height (mm) 950mm
Max Depth of Cut (mm) 8mm
Feed Speed (m/min) 8 / 16M/Min.
Electric Table Control Yes
Rubber Outfeed Rollers
Additional (2nd) Rubber Outfeed Roller
Integral Table Rollers
Segmental Infeed Roller
Motor Power - 3 Phase (HP) 7.5hp
Weight (Kg) 680kg
Dimensions (mm) 530 x 950mm
From £4,999.00
